SPECIFIC FEATURES OF THE RAILCAR KINEMATICS CAUSING ROLLING STOCK DERAILMENT WHEN TRAVERSING TURNOUTS
Abstract and keywords
Abstract:
This study focuses on issues of improving train safety on challenging railway track sections, including mountain pass lines and station tracks, with a particular emphasis on the railcar-track system. Objective: to identify non-obvious causes and relationships leading to rolling stock derailment when passing through turnouts. Methods: this research adhered to the established methodological framework for investigating derailment incidents as sanctioned by the regulatory protocols of JSC “Russian Railways”. In addition, the Universal Mechanism software package was used to simulate and evaluate the dynamic behaviour of the railcar. Results: the findings indicate that localized degradation in specific rolling stock components, such as the automatic coupler, can induce significant lateral forces. These forces are sufficient to cause wheelset unloading, thereby an increased risk of derailment. The study analyzed the interaction between the wheelset and the track under standardized parameters, resulting in the generation of graphical dependencies illustrating the lateral and vertical forces arising at the wheel-track contact. Practical significance: the results of the study make it possible to reconsider the issue of rolling stock-track interaction by incorporating updated concepts regarding the internal and external kinematics of railcars. The investigation concludes that even minor deviations in the technical integrity of individual parts can have a profound effect on operational safety. Thus, the necessity for developing a more precise methodology for safety assessment based on these technical nuances.

Keywords:
safety of train operation, track switch, freight car, automatic coupling, rolling stock derailment, railcar kinematics
Text
Text (PDF): Read Download
References

1. Sokol E. N. Shody s rel'sov i stolknoveniya podvizhnogo sostava (Sudebnaya ekspertiza. Elementy teorii i praktiki). Kiev: Transport Ukrainy, 2004. 368 s.

2. Olencevich V. A., Gozbenko V. E. Analiz prichin narusheniya bezopasnosti raboty zheleznodorozhnoy transportnoy sistemy // Sovremennye tehnologii. Sistemnyy analiz. Modelirovanie. 2013. № 1 (37). S. 180–183.

3. Krylach A. I., Buyannemeh A., Olencevich V. A. Voprosy povysheniya urovnya bezopasnosti dvizheniya poezdov na Vostochnom poligone // Molodaya nauka Sibiri. 2024. № 1 (23). S. 22–30.

4. Ermolenko I. Yu., Morozov D. V., Astashkov N. P. Vliyanie prodol'nyh nagruzok na bezopasnost' dvizheniya pri ekspluatacii na gorno-pereval'nyh uchastkah puti // Vestnik RGUPS. 2021. № 2. S. 104–111. DOI:https://doi.org/10.46973/0201-727X_2021_2_104.

5. Baklanov A. A., Klyuka V. P., Mosol S. A. Analiz prichin shoda podvizhnogo sostava s rel'sov // Izvestiya Transsiba. 2024. № 2 (58). S. 46–60.

6. Pravila tehnicheskogo obsluzhivaniya tormoznogo oborudovaniya i upravleniya tormozami zheleznodorozhnogo podvizhnogo sostava: protokol zasedaniya Soveta po zheleznodorozhnomu transportu gosudarstv — uchastnikov Sodruzhestva ot 6–7 maya 2014 goda № 60.

7. Tyun'kov V. V., Rychkov N. P., Buzunova V. S. Sintez konstruktivnyh resheniy na osnove dempfirovaniya v predelah vnutrenney kinematiki gruzovyh vagonov // Informacionnye tehnologii i matematicheskoe modelirovanie v upravlenii slozhnymi sistemami. 2021. № 3 (11). S. 9–16. DOI:https://doi.org/10.26731/2658-3704.2021.3(11).9-16.

8. Sidorova E. A., Pevzner V. O., Chechel'nickiy A. I. Pokazateli silovogo vzaimodeystviya puti i podvizhnogo sostava pri dvizhenii gruzovogo vagona po dlinnym nerovnostyam s uchetom deystviya prodol'nyh sil // Vestnik nauchno-issledovatel'skogo instituta zheleznodorozhnogo transporta (Vestnik VNIIZhT). 2021. T. 80, № 6. S. 359–365. DOI: https://dx.doi. org/10.21780/2223-9731-2021-80-6-359-365.

9. Saharov P. A. Raschetno-eksperimental'nyy metod issledovaniya prodol'noy dinamiki poezda // Mehanika. Issledovaniya i innovacii. 2020. Vyp. 13. S. 128–140.

10. GOST 33211-2014. Vagony gruzovye. Trebovaniya k prochnosti i dinamicheskim kachestvam (s Popravkoy, s Izmeneniem № 1): nacional'nyy standart Rossiyskoy Federacii: utverzhden i vveden v deystvie Prikazom Federal'nogo agentstva po tehnicheskomu regulirovaniyu i metrologii ot 05.06.2015 № 565-st. M.: Standartinform, 2020. 54 s.

11. Frishman M. A. Kak ustroen put' pod poezdami. M.: Transport, 1975. 175 s.

12. Karpuschenko N. I., Komardinkin R. A. Obespechenie bezopasnosti pri proezde poezdov po strelochnym perevodam na osobogruzonapryazhennyh uchastkah // Vestnik Sibirskogo go- sudarstvennogo universiteta putey soobscheniya. 2022. № 3 (62). S. 31–39. DOIhttps://doi.org/10.52170/1815- 9265_2022_62_31.

13. Povorozhenko V. V., Bogdanov Yu. V., Pigusov V. N. Put' i putevoe hozyaystvo. M.: Transport, 1986.

14. Gavryushin M. A., Spirov A. V., Lunin A. A. Issledovanie prichin shodov podvizhnogo sostava metodami komp'yuternogo modelirovaniya // Komp'yuternoe modelirovanie v zheleznodorozhnom transporte: dinamika, prochnost', iznos: tezisy dokladov VI Nauchno- tehnicheskogo seminara. Bryansk, 2024. S. 105–109.

15. Rezul'taty dinamicheskih i po vozdeystviyu na put' ispytaniy poezdov povyshennoy massy i dliny / V. S. Kossov [i dr.] // Vestnik Instituta problem estestvennyh monopoliy: Tehnika zheleznyh dorog. 2018. № 2 (42). S. 82–87.

16. GOST 10791-2011. Kolesa cel'nokatannye. Tehnicheskie usloviya (s Izmeneniem № 1): nacional'nyy standart Rossiyskoy Federacii: utverzhden i vveden v deystvie Prikazom Federal'nogo agentstva po tehnicheskomu regulirovaniyu i metrologii ot 23.06.2011 № 142-st. M.: Standartinform, 2011. 40 s.

17. Morozov D. V., Ermolenko I. Yu., Pyhalov A. A. Vliyanie sil uprugogo psevdoproskal'zyvaniya kolesnyh par na vozniknovenie udarnyh impul'sov v poezde // Dinamika i vibroakustika. 2025. T. 11, № 1. C. 40–50. DOI:https://doi.org/10.18287/2409-4579-2025-11-1-40-50.

Login or Create
* Forgot password?