Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets

Yuriy A. Belentsov; Valeriy Efimov; Vyacheslav Solov&#039;ev

doi:10.20295/2223-9987-2025-2-158-171

UDC

531.7.08

CALIBRATION OF THE AUTOMATED ULTRASONIC INSPECTION SYSTEM FOR SHUTTLE R HOLLOW AXLE’S WHEELSETS Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets

АА Аа

Published in Bulletin of scientific research results · Pages 158–171 · Rubric: PROBLEMATIC OF TRANSPORT SYSTEM

DOI: https://doi.org/10.20295/2223-9987-2025-2-158-171

Received: 30.04.2025 Accepted: 03.06.2025 Published: 27.06.2025

Authors

Yuriy A. Belentsov

Valeriy Efimov

Vyacheslav Solov'ev

Yuriy A. Belentsov

Academic degree: doctor of technical sciences

Emperor Alexander I St. Petersburg State Transport University Professor · Russian Federation

Valeriy Efimov

Oktyabrsky Center of Metrology — structural unit Oktyabrskaya Railway — a branch of JSC “Russian Railways”, letter A, section of the railway “Ligovsky Canal-Pulkovskoe highway” Engineer of the First Category · Russian Federation

Vyacheslav Solov'ev

Emperor Alexander I Petersburg State Transport University Student · Russian Federation

ABSTRACT

Purpose: To develop a calibration method, analyze the use of domestic calibration tools and compare them with foreign measuring tools. To undertake a feasibility assessment, with the aim of constructing a methodology for calibration. Methods: A comparison was made of the metrological characteristics of measuring instruments used in calibration, with analytical and graphical methods being utilized in the process. The risk assessment was conducted employing the Ishikawa diagram. Results: The potential for calibrating the complex of automated ultrasonic control of hollow axles of SHUTTLE R wheelsets using domestic measuring instruments has been ascertained. A comparison of the metrological characteristics of the calibrated measuring instruments made it possible to substantiate the expediency of developing a unified calibration methodology for several types of measuring instruments. The analysis of measurement methods, domestic measuring instruments, calibration standards, and their use has been justified. A thorough analysis of domestic calibration tools has revealed their capacity to fulfil the measurement tasks during the calibration process. The method of transmitting a unit of magnitude has been defined. An evaluation of the risks associated with the utilization of calibration techniques has been conducted. Practical significance: The introduction of domestic measuring instruments has been identified as a potential catalyst for stimulating the country’s economy. The multi-type calibration methodology provides a comprehensive calibration approach and simplifies calibration procedures. The novel technique facilitates a more precise evaluation of the metrological characteristics of the measuring instrument and enhances the reliability of measurement outcomes. This approach is expected to enhance the metrological support process, reduce time and material costs, and ensure the uniformity of calibration procedures for technically similar measuring instruments. In the context of technological sovereignty, the development of domestic measuring tools is a strategically important task that requires coordination of efforts by manufacturers, metrological services and regulatory authorities.

KEYWORDS

Measuring installation, calibration, etalons, measurement methods, measurement error

Text

Text (PDF)

Read Download

1. Korshunov V. A. Aktual'nye voprosy sovremennogo razvitiya radiotehnicheskih i radioelektronnyh sredstv izmereniy / V. A. Korshunov, A. S. Kornev, A. M. Patapenya // Zakonodatel'naya i prikladnaya metrologiya. — 2020. — № 4(166). — S. 30–35.

2. Makeeva N. A. Ocenka vostrebovannosti uslug po kalibrovke etalonov i sredstv izmereniy / N. A. Makeeva // Kompetentnost'/Competency (Russia). — 2018. — № 7. — S. 44–48.

3. GOST R 8.1030—2024. Gosudarstvennaya sistema obespecheniya edinstva izmereniy. Klassifikaciya sredstv izmereniy. — M.: Rossiyskiy institut standartizacii, 2024. — 102 s.

4. Federal'nyy informacionnyy fond po obespecheniyu edinstva izmereniy FGIS «Arshin». — URL: https://fgis.gost.ru/fundmetrology/registry (data obrascheniya: 10.03.2025).

5. Sistema kalibrovki sredstv izmereniy v OAO «RZhD». Mezhkalibrovochnye intervaly sredstv izmereniy (utverzhdeny starshim vice-prezidentom V. A. Gapanovichem ot 31.10.2012 № 335; v red. rasporyazheniya OAO «RZhD» ot 26.08.2020 № 1823/r). — M.: OAO «RZhD», 2020.

6. Prikaz Federal'nogo agentstva po tehnicheskomu regulirovaniyu i metrologii ot 30 dekabrya 2019 g. № 3383 «Ob utverzhdenii Gosudarstvennoy poverochnoy shemy dlya sredstv izmereniy oslableniya napryazheniya postoyannogo toka i elektromagnitnyh kolebaniy v diapazone chastot ot 20 Gc do 178,4 GGc». — M.: Rosstandart, 2019.

7. Prikaz Federal'nogo agentstva po tehnicheskomu regulirovaniyu i metrologii ot 26 sentyabrya 2022 g. № 2360 «Ob utverzhdenii Gosudarstvennoy poverochnoy shemy dlya sredstv izmereniy vremeni i chastoty». — M.: Rosstandart, 2022.

8. Zubarev A. S. Problemy metrologicheskogo obespecheniya mer (nastroechnyh obrazcov) dlya ul'trazvukovogo metoda nerazrushayuschego kontrolya, vypuskaemyh v sootvetstvii s GOST R 55724—2013 / A. S. Zubarev // Akustoopticheskie i radiolokacionnye metody izmereniy i obrabotki informacii: trudy XVI Mezhdunarodnoy nauchno-tehnicheskoy konferencii, Suzdal', 09–12 oktyabrya 2023 goda. — M.: Nauchno-tehnologicheskiy centr unikal'nogo priborostroeniya RAN, 2023. — S. 299–304.

9. GOST R 55809—2013. Kontrol' nerazrushayuschiy. Defektoskopy ul'trazvukovye. Metody izmereniy osnovnyh parametrov. — M.: Federal'noe agentstvo po tehnicheskomu regulirovaniyu i metrologii, 2013. — 16 s.

10. Ivanov V. I. Metrologicheskaya klassifikaciya metodov i sredstv nerazrushayuschego kontrolya i tehnicheskoy diagnostiki / V. I. Ivanov, V. N. Panchikov, I. E. Vlasov // Mir izmereniy. — 2012. — № 6. — S. 3–7.

GOST

Belentsov Y. A., Efimov V. D., Solov'ev V. S. Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets // Bulletin of scientific research results. 2025. no. 2. pp. 158-171. DOI: https://doi.org/10.20295/2223-9987-2025-2-158-171. (Date of access 08.09.2026).

MLA

Yuriy A. Belentsov, Efimov V. D., Solov'ev V. S.. "Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets." Bulletin of scientific research results 2025.2 (2025): 158-171. DOI: https://doi.org/10.20295/2223-9987-2025-2-158-171.

APA

Belentsov Y. A., Efimov V. D., Solov'ev V. S. (2025). Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets. Bulletin of scientific research results, 2025(2), 158-171. https://doi.org/10.20295/2223-9987-2025-2-158-171

Chicago

Yuriy A. Belentsov, Efimov V. D., Solov'ev V. S.. "Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets." Bulletin of scientific research results 2025, no. 2 (2025): 158-171. https://doi.org/10.20295/2223-9987-2025-2-158-171.

WIKI

{{cite journal | author = Belentsov Y. A., Efimov V. D., Solov'ev V. S. | title = Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets | journal = Bulletin of scientific research results | year = 2025 | volume = 2025 | issue = 2 | pages = 158-171 | doi = 10.20295/2223-9987-2025-2-158-171 }}

Copy

Export: BibTeX EndNote RefMan RusMARC

CALIBRATION OF THE AUTOMATED ULTRASONIC INSPECTION SYSTEM FOR SHUTTLE R HOLLOW AXLE’S WHEELSETS Calibration of the Automated Ultrasonic Inspection System for SHUTTLE R Hollow Axle’s Wheelsets

Confirmation