Russian Federation
Russian Federation
Emperor Alexander I St. Petersburg State Transport University (Department of Ground Transport and Technological Complexes, Postgraduate Student)
Russian Federation
Purpose: substantiation of the possibility to increase the load capacity of gondola cars using high-strength steel in the car body structure. Methods: gondola cars load capacity changing analysis. Numerical research of the effect of the steel yield strength value on the mass of the beam structure according to the criteria of strength and stiffness for a beam on two hinged supports operating in bending, and also according to the buckling criteria of a compressed beam. Gondola car body structure finite element analysis in order to confirm the strength and buckling parameters with the normative requirements. Results: the analysis of load capacity of universal fouraxle gondola cars built in the period from the beginning of production of the first Russian cars up to the present time was performed. Results of the analysis of the effect of steel yield strength on the mass of the structure according to the strength criteria and stiffness for a beam on two hinged supports operating in bending, and also according to the buckling criteria of a compressed beam was presented. High-strength steel technical requirements for welded structures of freight wagons is considered. Parameters for evaluating the suitability of rolled high-strength steel for freight wagon construction are given. The results of strength and stability analysis of the gondola car model 12-6744 with high-strength steel, which confirm the design compliance of the car in terms of normative parameters of strength and stability with the requirements of the existing standards are given. The gondola car model 12-6744 advantages are described, as well as the economic effect of its operation for the consignor. Practical importance: the possibility of using high-strength steel to increase the load capacity of gondola cars is substantiated. The gondola car model 12-6744 with high-strength steel was designed. Its advantages are given, and the economic effect of operating such a wagon for the consignor is shown.
four-axle gondola car, universal gondola car, increased load capacity, high-strength steels, evaluation of strength and stiffness of the gondola car body structure, gondola frame structure buckling analysis
1. TR TS 001/2011. Tehnicheskiy reglament Tamozhennogo soyuza «O bezopasnosti zheleznodorozhnogo podvizhnogo sostava».
2. GOST 33211-2014. Vagony gruzovye. Trebovaniya k prochnosti i dinamicheskim kachestvam. M.: Standartinform, 2014.
3. Normy dlya rascheta i proektirovaniya vagonov zheleznyh dorog MPS kolei 1520 mm (nesamohodnyh). M.: GosNIIV-VNIIZhT, 1996.
4. Shadur L. A. Razvitie otechestvennogo vagonnogo parka. M.: Transport, 1988. 279 s.
5. Mokrshickiy E. I. Istoriya vagonnogo parka zheleznyh dorog SSSR. M.: Izd-vo i 1‑ya tip. Transzheldorizdata, 1946. 203 s.
6. Tipazh «Vagony gruzovye magistral'nye na 1986–2000 gg.». M.: VNIIZhT, VNIIV, 1986. 30 s.
7. O rezul'tatah vyvoda na rynok telezhki principial'no novoy konstrukcii na primere 18-9855 / A. M. Orlova [i dr.] // Tehnika zheleznyh dorog. 2023. № 2 (62). S. 34–41.
8. Katalog produkcii OVK // Nauchno-proizvodstvennaya korporaciya «Ob'edinennaya vagonnaya kompaniya». URL: https://www.uniwagon.com/#!products (data obrascheniya: 03.05.2024).
9. Smol'yaninov A. V., Kolyasov K. M. Analiz parametrov i konstruktivnyh resheniy kuzovov innovacionnyh vagonov // Transport Urala. 2020. № 4 (67). S. 34–39.
10. Smol'yaninov A. V. Analiz konstrukciy i parametrov poluvagonov, ispol'zuemyh dlya tyazhelovesnogo dvizheniya // Transport Urala. 2017. № 4 (55). S. 26–30.
11. Novoselov A. Yu., Korotkov D. S., Popesku R. V. Uluchshenie tehniko-ekonomicheskih harakteristik poluvagonov // Zheleznodorozhnyy transport. 2023. № 7. S. 26–32.
12. Orlova A. M., Demin K. P., Popesku R. V. Kak povysit' effektivnost' poluvagona: napravleniya snizheniya tehnicheskogo koefficienta tary // Transport RF. 2023. № 3–4 (106– 107). S. 33–38.
13. GOST 19281-2014. Prokat povyshennoy prochnosti. Obschie tehnicheskie usloviya.
14. Vysokoprochnye stali s ekonomnym legirovaniem dlya kar'ernogo transporta i gornodobyvayuschey tehniki / V. N. Nikitin [i dr.] // Stal'. 2016. № 10. S. 57–66.
15. Boronenko Yu. P., Filippova I. O. Ispol'zovanie vysokoprochnyh staley v vagonostroenii // Transport Rossiyskoy Federacii. 2015. № 3 (58). S. 16–19.
16. Tanicheva N. A., Fedorov I. V., Filippova I. O. S'emnoe oborudovanie dlya perevozki lesomaterialov: novye tehnicheskie resheniya i primenenie vysokoprochnyh staley // Izvestiya Peterburgskogo universiteta putey soobscheniya. 2020. T. 17, № 1. S. 117–128.
17. GOST 32.153-2000. Metalloprokat dlya kuzovov gruzovyh vagonov novogo pokoleniya. Tehnicheskie trebovaniya.
18. GOST 9454-78. Metally. Metod ispytaniya na udarnyy izgib pri ponizhennyh, komnatnoy i povyshennyh temperaturah.
19. GOST 7268-82. Stal'. Metod opredeleniya sklonnosti k mehanicheskomu stareniyu po ispytaniyu na udarnyy izgib.
20. GOST 14019-2003. Materialy metallicheskie. Metod ispytaniya na izgib.
21. GOST 6996-66. Svarnye soedineniya. Metody opredeleniya mehanicheskih svoystv.
22. GOST 5639-82. Stali i splavy. Metody vyyavleniya i opredeleniya velichiny zerna.
