Russian Federation
UDK 658.512 Проектирование производственных (технологических) процессов. Определение последовательности операций. Маршрутизация процесса
UDK 656.25 Меры безопасности. Сигналы
This article considers a row of issues and problems in the area of optimal planning of jobs on technical servicing of railway automation and telemechanics devices in the process of planned-preventive servicing realization including the analysis of modern level and possibilities to increase task number being solved during automation of planning. Technologies for infrastructure device servicing, providing for minimizing and ideally - for influence elimination of so-called «human factor» on work implementation quality, are considered presently to be the most promising. One of the ways to reduce unproductive resource costs is to develop new approaches to technical servicing planning at that to, both, long-range planning (distribution of individual jobs by dates) and operational planning (making up an order to fulfill individual jobs within a shift). A vital task is a work planning automation in the frames of planned-preventive servicing of railway automation and telemechanics devices on the basis of fixation of technological situations that’re equivalent to functioning imitation of devices in various modes. In order to realize the set task, it’s proposed to develop corresponding digital models, which provide for technological situation identification and for the definition of work set, which will be considered as implemented, as well as the set of activities, which’re needed to be implemented on time.
railway automatics and telemechanics devices, technical servicing, technical servicing planning, digital model
1. Pomenkov D.M. Cifrovaya transformaciya hozyaystva avtomatiki i telemehaniki // Avtomatika, svyaz', informatika. - 2019. - № 4. - S. 12-14.
2. Nasonov G.F. Cifrovaya transformaciya infrastruktury // Avtomatika, svyaz', informatika. - 2019. - № 4. - S. 2-4.
3. Sistema tehnicheskogo diagnostirovaniya i monitoringa ustroystv ZhAT (STDM ADK-SCB): monografiya / A.A. Sepetyy, A.E. Fedorchuk, M.V. Prischepa, I.A. Faraponov, E.A. Goman. Rostov n/D: RGUPS, 2012, 347 s.
4. Efanov D.V. Funkcional'nyy kontrol' i monitoring ustroystv zheleznodorozhnoy avtomatiki i telemehaniki: monografiya. SPb.: FGBOU VO PGUPS, 2016, 171 s.
5. Gibridnaya sistema centralizacii strelok i svetoforov «RPC-DON»: monografiya; pod obschey red. I.D. Dolgogo i A.G. Kul'kina. Rostov n/D: RGUPS, 2012, 388 s.
6. Diagnostika ABTC-MSh / E.E. Shuhina, A.V. Markov, I.M. Kravec, S.S. Shurygin // Avtomatika, svyaz', informatika. - 2015. - № 1. - S. 8-9.
7. Shamanov V.I., Pul'tyakov A.V. Sovershenstvovanie sistemy tehnicheskogo obsluzhivaniya ustroystv avtomatiki // Avtomatika, svyaz', informatika. - 2008. - № 12. - S. 13-15.
8. Kaynov V.M. Cifrovizaciya tehnologiy v infrastrukturnom komplekse // Avtomatika, svyaz', informatika. - 2019. - № 4. - S. 9-10.
9. Polosin A.N., Gromov A.N. Sistema podderzhki prinyatiya resheniy po planirovaniyu obsluzhivaniya sredstv izmereniy tehnologicheskih peremennyh na neftepererabatyvayuschem predpriyatii // Matematicheskie metody v tehnike i tehnologiyah - MMTT. - 2019. - T. 7. - S. 130-135.
10. Optimal'noe planirovanie poverki i remonta sredstv izmereniy parametrov raket-no-kosmicheskoy tehniki kosmodroma / V.S. Chaporgin, N.S. Kulish, Yu.V. Bogdanov // Dvoynye tehnologii. - 2008. - № 4 (45). - S. 40-46.
11. Stankevich A.M. Zadacha optimal'nogo formirovaniya paketov rabot na tehnicheskoe obsluzhivanie vozdushnyh sudov (obschaya postanovka) // Nauchno-tehnicheskiy vestnik Povolzh'ya. - 2018. - № 10. - S. 196-198.
12. Scheduling Preventive Railway Maintenance Activities / Gabriella Budai, Dennis Huisman and Rommert Dekker // Conference: Systems, Man and Cybernetics, 2004 IEEE Internation-al Conference. Journal of the Operational Research Society, volume 57, pages 1035-1044 (2006). DOIhttps://doi.org/10.1057/palgrave.jors.2602085.
13. Dao, C., Basten, R., and Hartmann, A. (2018). Maintenance scheduling for railway tracks under limited possession time. Journal of Transportation Engineering Part A: Systems, 144 (8), [04018039]. DOI:https://doi.org/10.1061/JTEPBS.0000163.
14. Lifar' A.S. K voprosu planirovaniya tehnicheskogo obsluzhivaniya i remonta gidroenergeticheskogo oborudovaniya // Perspektivy nauki. - 2021. - № 5 (140). - S. 12-15.
15. Rybina G.V., Blohin Yu.M. Metody i sredstva intellektual'nogo planirovaniya: primenenie dlya upravleniya processami postroeniya integrirovannyh ekspertnyh sistem // Iskusstvennyy intellekt i prinyatie resheniy. - 2015. - № 1. - S. 75-93.
16. Rybina G.V., Blohin Yu.M. Metody i programmnye sredstva intellektual'nogo planirovaniya dlya postroeniya integrirovannyh ekspertnyh sistem // Iskusstvennyy intellekt i prinyatie resheniy. - 2018. - № 1. - S. 12-28.
17. Parhomenko P.P., Sogomonyan E.S. Osnovy tehnicheskoy diagnostiki (optimizaciya algoritmov diagnostirovaniya, apparaturnye sredstva) / pod red. P.P. Parhomenko. M.: Energoatomizdat, 1981, 319 s.
18. Shvalov D.V., Urazova I.E. Realizaciya podderzhki prinyatiya resheniy v processe tehnicheskogo obsluzhivaniya stancionnyh rel'sovyh cepey // Sb. nauch. tr. «Transport: nauka, obrazovanie, proizvodstvo» («Transport-2020»). T.1. Tehnicheskie nauki. - Rostov n/D: RGUPS, 2020. - S. 173-176.
19. Edinaya stancionnaya platforma obmena informaciey nizovyh sistem avtomatizacii / A.E. Hatlamadzhiyan, Yu.F. Zolotarev, I.A. Ol'geyzer // Avtomatika, svyaz', informatika. - 2021. - № 11. - S. 34-36.
20. Povyshenie kachestva ekspluatacii mikroprocessornyh ustroystv / M.V. Bel'kevich, A.V. Pul'tyakov, R.V. Lihota, V.A. Alekseenko // Avtomatika, svyaz', informatika. - 2016. - № 1. - S. 24-27.
21. Kozlov P.A., Bushuev S.V. Model' racional'nogo raspredeleniya ogranichennyh resursov na obsluzhivanie i modernizaciyu sistem zheleznodorozhnoy avtomatiki // Trans-port Urala. - 2015. - № 1 (44). - S. 48-52.
